lattice girder

Every so often, a construction or scaffolding project needs a temporary structure that spans an open space, without a support sitting directly under every section. That’s where a lattice girder earns its place.

So what is it? A lattice girder is a structural member built from an upper chord and a lower chord, tied together by diagonal or vertical members. That framework carries loads across a span. In scaffolding, lattice girders are used in engineered arrangements to bridge openings and support specialized access structures.

Get the lattice girder design right and you open up useful spanning options for construction, industrial maintenance and infrastructure work. Below, we cover the common types, the components, where they’re used, their benefits and what to check before you buy.

What Is a Lattice Girder in Construction?

Picture a beam-like component with an open framework, usually arranged in triangles. In an idealized truss, the connected members mainly carry tension and compression. A continuous solid-web beam behaves differently.

On site, a suitable lattice girder can bridge a building entrance or an equipment area while passing loads across to designated supports. Scaffolds Supply lists Ringlock lattice girders in several lengths for compatible scaffold systems.

What Are the Main Components of a Lattice Girder?

Each of the lattice girder components below has its own job to do.

Top chord

This is the upper longitudinal member. In a typical simply supported girder loaded from above, it’s mostly in compression. The actual forces, though, depend on how it’s loaded and supported.

Bottom chord

The lower longitudinal member. Under similar conditions, it mainly resists tension.

Diagonal members

These link the two chords and help move internal forces through the girder. Any one of them may end up in tension or in compression.

Vertical members

Some designs add vertical connections between the chords, to support the force distribution the designer intended.

Connections and bracing

Joints hold the members together and pass forces on to the supporting scaffold system. Bracing helps protect the compression members, and the girder as a whole, against instability.

Different Types of Lattice Girders

Steel lattice girder

Made from structural steel, and often protected with hot-dip galvanizing. Steel lattice girders turn up in scaffold and industrial support arrangements, wherever their design and capacity suit the job. One example: Scaffolds Supply lists a 12-foot Ringlock lattice girder in galvanized structural steel.

Aluminum lattice girder

A lighter-material option. You’ll find it in selected temporary structures and specialized access designs, subject to the manufacturer’s ratings and connections.

Parallel-chord lattice girder

Here the upper and lower chords run roughly parallel. That layout makes it relevant for scaffold spanning work.

Triangular or custom-engineered lattice girder

Some specialty temporary structures call for triangular sections or member arrangements designed for that one purpose. material type and structural shape can overlap, so one girder may fit more than one of these categories.

How Does Lattice Girder Design Work?

Lattice girder design decides how loads travel through the chords, web members, connections and supports. Engineers look at the span, the applied loads, allowable deflection, stability, bracing, material properties and the strength of the structure holding everything up.

Span and depth

For similar loads, a longer span can mean higher structural demands and more deflection. Making the girder deeper may cut chord forces for a given bending moment. It still doesn’t replace full design checks.

Load transfer and connection capacity

The top chord, bottom chord, diagonal members and joints all work as one. In scaffolding, the support points and the scaffold standards under the girder also have to carry the calculated loads.

Bracing and stability

Compression members and girders without bracing can buckle. It’s up to the designer to specify the right restraint, connections and erection requirements.

Important: The girder length you see in a catalog is not the same thing as its approved unsupported span, or its safe load capacity.

Where Are Lattice Girders Used in Scaffolding?

In lattice girder scaffolding, the girder usually solves one problem: getting across a gap. Here’s where that comes up.

Bridging building entrances

Sometimes the access underneath has to stay clear. An engineered lattice girder can carry scaffold loads over the opening to approved supports on either side.

Industrial maintenance access

Fixed process equipment, pipework and machinery can’t always be moved. With a layout engineered for the site, temporary scaffold spans can work around them.

Temporary work platforms

Specialty access structures sometimes rely on lattice girders to hit a designed span or clearance while they hold up working platforms.

Infrastructure projects

Bridge work and other infrastructure maintenance can call for specialized scaffold configurations that span obstacles.

Ringlock scaffolding systems

Compatible Ringlock girders and trusses are available for scaffold layouts that need wider clearances. How you use them has to match the manufacturer’s system and an approved scaffold plan.

Advantages of Steel Lattice Girders

  • Efficient open framework: The structural material is laid out to carry the internal forces it’s meant to carry.
  • Useful clear openings: Some layouts can do without intermediate vertical supports inside a designed span.
  • Flexible temporary works planning: Engineers can plan around site obstructions and restricted areas.
  • Durable product options: Galvanizing can give you corrosion resistance. Inspection still matters.
  • Suitable specialized applications: Lattice girders can form part of engineered commercial and industrial access structures.

Lattice Girder vs. Solid Steel Beam

The difference starts with how they’re built. A lattice girder uses chords and a network of web members, while a solid steel beam has a continuous, or largely continuous, structural section.

For certain conditions, a lattice girder can span efficiently. It does need close attention to its member connections, bracing and installation, though. A solid beam brings its own bending, shear, connection and buckling considerations.

So which is better? Neither, across the board. Let the project design decide.

How to Choose the Right Lattice Girder

Confirm the opening and support arrangement

Measure the span you need, and confirm exactly where the girder will bear. Product length alone shouldn’t drive the choice.

Review loading and structural calculations

Account for the scaffold’s self-weight, platforms, workers, stored materials and any other applicable actions. Then have the load path checked all the way through the supporting scaffold.

Verify scaffold system compatibility

A Ringlock girder has to match the approved system components and connections. Mixing unknown brands? Not without written compatibility approval.

Check finish, dimensions, and availability

Confirm the material, coating, length and connection details, along with the relevant manufacturer documentation. Among its product options, Scaffolds Supply lists a 20-foot Ringlock lattice girder.

Inspect before use

Look for bent members, cracked welds, corrosion that affects performance, damaged connection points and any unauthorized alterations. If a girder looks questionable, take it out of service until a competent person has evaluated it.

Common Lattice Girder Mistakes to Avoid

  • Picking a product just because its nominal length covers the opening.
  • Overlooking the loads on supporting standards, bases and foundations.
  • Leaving out the lateral restraints and bracing shown on the approved design.
  • Using incompatible connectors, or truss members that are damaged.
  • Loading platforms past what the engineered arrangement allows.

For general scaffold inspection practices, see Scaffolding Components for a Safe Worksite: Complete Safety Guide.

Buy Ringlock Lattice Girders From Scaffolds Supply

Scaffolds Supply offers Ringlock lattice girders in several lengths for compatible scaffold applications. Contractors can compare the listed product dimensions, then talk to the sales team about the right components for their project.

Visit Scaffolds Supply to browse products. For a critical scaffold configuration, confirm the structural capacity, compatibility, support arrangement and installation requirements with a qualified designer before you order.

Frequently Asked Questions

What is a lattice girder used for?

It carries loads across a span through a set of connected structural members. In scaffolding, it may bridge entrances, equipment and other openings as part of an engineered system.

What are the main lattice girder components?

Top and bottom chords, diagonal members and connections. Some designs also have vertical members and extra bracing.

What is a steel lattice girder?

A lattice girder made from structural steel members. It’s used where the product’s design gives suitable capacity and stability.

What affects lattice girder design?

Span, load distribution, material strength, girder depth, connections, bracing, supports and allowable deflection. All of them matter.

Are lattice girders and trusses the same?

Close, but not always identical. A lattice girder is a truss-like structural member, and scaffold catalogs sometimes use the labels interchangeably. The exact designs vary.

How far can a scaffold lattice girder span?

There’s no universal distance. The safe span depends on the exact product, loads, connections, supports and approved design.

Can lattice girders be used with Ringlock scaffolding?

Yes. Compatible Ringlock lattice girders are made for certain configurations, subject to the complete approved scaffold design.

 

Leave a Reply

Your email address will not be published. Required fields are marked *